12
Replacement of record needle
※ After using record needle for about 400
hours, sound quality becomes poor and the
record may get damaged. Please replace
record needle early.
※ Use the record needle by Audio-Technica
ATN-3600 for replacement. DO NOT use
other needles.
※ Refer to manual of ATN-3600L for
replacement.
Pull down the end of needle to remove it
downward.
Insert the protrusion at back end of
replacement needle to the back end of
cartridge groove.
After mounting, ensure that the cantilever of
the needle fits in the groove of the armature.
※ Ensure that the cantilever is at the
proper position for best performance.
Push the tip until it clicks as shown below.
※ Do not apply too much force on the
needle tip, cantilever, and armature
when mounting.
To Next Page
Loading...