RECORD MATE STOKYO RM-1 - Specifications

13
Care
※ Be sure to unplug AC adapter before maintenance.
●Care of the main body
■ Wipe the surface with soft dry cloth.
■ If the surface is very dirty, clean carefully with a wet cloth after squeezing well.
※ Do not use hard sponge or scrubber like melamine sponge to avoid scratch.
※ Do not use polishing powder, scourer, or solvent like benzine, thinner, or alcohol.
●
Care of AC adapter plug
■ Wipe the surface with soft dry cloth.
※ Do not use polishing powder or solvent like benzine, thinner, or alcohol.
Specifications
Product name
Portable player
Model
Main body
Power source
(Automatic switch system)
AC adapter (Input: 120V - 50/60Hz, Output: DC8V 350mA
）
DC 9V (six AA dry cell batteries) *Battery is not included.
Power consumption
4W (1.2W during standby)
Overall size
About 220(W)×385(D)×73(H)mm (protrusion excluded)
Weight
About 1.3kg (batteries excluded)
Supplied terminal
Terminal for earbuds and recording
Accessory
An adapter for EP, a record holder, an AC adapter, Operation manual with
warranty (this manual)
Record player
Model 2-speed player
Rpm
33 ⅓rpm, 45rpm
Attached mechanism
Rotation speed adjustment mechanism (more than ±5%)
Tone arm
Dynamic balance type
Cartridge
AT-3600LA by Audio-Technica
Needle ATN-3600L by Audio-Technica
Motor DC motor
Drive system
Belt drive
Turntable
17cm
Speaker
Speaker 10cm (8Ω), 2W
* Appearance and specifications are subject to change without notice. This product is designed and sold in Japan. It cannot be used in regions of different utility
frequencies. We do not provide after-sales service like repair or selling parts outside Japan.
RM-1 (stokyo original model)