4. Machine Specification
RPMS-R SPECIFICATION
Suitable Routers: ¾HP - 5HP
Main Table Surface: 780mm x 250mm
Sliding Table Surface: 784mm x 310mm
Tilt Table: 45°
Table Inserts: Outside 100mm ø Inside 60mm, 29mm ø
Table Height: 850mm
Fence Sizes (Both Sides): 270mm x 50mm
Dust Hood Output: 100mm
Net Weight: 54kg
Gross Weight: 56kg
Packaging Dimensions: 851mm x 610mm x 191mm
3. Contents of Loose Parts Bag
After the machine has been unpacked, check that all loose parts shown below are
present. Again, if any parts are missing or incorrect please contact your local dealer before
attempting to use your router table.
1. Left fence assembly - 1 set
2. Power cord (UK only)
3. Switch box
4. 29mm table insert
5. 60mm table insert
6. 4 x Router clamp
7. 2 x Fence handle
8. 1 x Pusher
9. 1 x Dust hood
10. Plastic anti kick guard
Tools needed for assembly: Wrenches, cross-head screwdriver and flat blade screwdriver.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
To Next Page
Loading...
