EasyManua.ls Logo

Red Arrow SMAS-P - TROUBLESHOOTING

Red Arrow SMAS-P
6 pages
Print Icon
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
2. Leave the building as quickly as possible. Touch doors to feel if they are hot before opening them. Use an alternative
exit if neccessary. Crawl along the floor, and do not stop to collect anything.
3. Meet at a pre-arranged meeting place outside the building.
4. Call the fire department from outside the building.
5. Do not go back inside a burning building. Wait for the fire department to arrive.
These guidelines will assist you in the event of a fire. However, to reduce the chance that fires will start, practice fire
safety rules and prevent hazardous situations.
TROUBLESHOOTING
WARNING: DO NOT disconnect battery to quiet an unwanted alarm. This will remove your protection. Fan the air or
open a window to remove smoke or dust.
Problem Solution
Smoke alarm does not sound when tested. NOTE: Push
test button for at least five seconds while testing!
1. Remove smoke alarm from mounting plate and check
that battery is properly attached to connector.
2. Clean smoke alarm.
Smoke alarm bleeps about once a minute. Replace battery. See battery replacement in the
maintenance and cleaning section.
Smoke alarm sound unwanted alarms intermittently or
when residents are cooking, taking showers, etc.
1. Clean smoke alarm. See cleaning in the maintenance and
cleaning section.
2. Move the smoke alarm to a new location. See Smoke
Alarm Placement.
The alarm sounds different to what i’m used to. It
starts and stops.
The alarm is operating correctly. This alarm features the
internationally recognised horn signal for evacuation. The
horn pattern is 3 short beeps followed by a 2 second pause
and then repeats.
T: 0800 195 0006 F: 0870 043 3946
E: sales@redarrowtrading.com www.redarrowtrading.com
Red Arrow Trading
Elsworth House, Herries Road South,
Sheffield, S6 1QS
Guarantee
This product is guaranteed for a period of 5 year from the date of purchase. The guarantee is invalid in the case of improper use, tampering, removal of the Q.C. date label, installation in
an improper working environment or installation not according to the current edition of the I.E.E. Wiring Regulations (BS7671). The guarantee is also invalidated if the luminaire has
been Mega tested. Should this product fail during the guarantee period it will be replaced free of charge, subject to correct installation and return of the faulty unit. We do not accept
responsibility for any installation costs associated with the replacement of this product. We reserve the right to alter specifications without prior notice.

Related product manuals