To Next PageTo Next Page
Need help?Do you have a question about the RED DEVIL 5400-02 and is the answer not in the manual?
General| Brand | RED DEVIL |
|---|---|
| Model | 5400-02 |
| Category | Paint Sprayer |
| Language | English |
Warning about explosion and hazard risks in certain environments, specifying materials to avoid.
Key safety instructions for safe operation and maintenance of the paint mixer.
Safety reminders specifically for the installation process, including grounding and environment.
Details on unpacking and preparing the 5400/5410 mixers, including oil cap and dipstick insertion.
Step-by-step guide for mounting the mixer onto either the counter or pedestal base.
Specific instructions for attaching the mixer to the counter base assembly.
Specific instructions for attaching the mixer to the pedestal base assembly.
Operational safety points, including grounding, hazardous environments, and container handling.
Step-by-step instructions for loading a can and performing the mixing cycle.
Safety measures to follow during maintenance, emphasizing unplugging and avoiding wet components.
Detailed steps for cleaning, lubricating, and adjusting belt tension on the paint mixer.
Methods for cleaning the mixer surfaces using appropriate cleaning agents and avoiding damage.
Guidance on checking oil levels and lubricating guide rods and clamp screws.
Instructions for adjusting belt tension on explosion-proof models.
Critical warning about unplugging the machine before any servicing or troubleshooting.
Wiring diagram for standard electrically-powered models.
Wiring diagram for older explosion-proof motors used prior to March 1, 2006.
Wiring diagram for explosion-proof motors manufactured after March 1, 2006.
Air supply requirements and connection for air-driven models.
How to control mixing time and handle flammable materials with air-driven models.
Maintenance specific to air-driven models, including air filter replacement.
Troubleshooting steps for air-driven units, focusing on air supply issues.
References to pages for specific parts of air-driven models.
Contact details and procedures for ordering replacement parts from Red Devil Equipment Co.
Policies regarding warranty, on-site repair, and use of approved replacement parts.
Information about restocking fees for returned unused parts.
Exploded view and part numbers for the right clamp assembly.
Exploded view and part numbers for the left clamp assembly.
Kits for converting older printed circuit board timers to newer models.
Exploded view and part numbers for the right clamp assembly on explosion-proof models.
Exploded view and part numbers for the left clamp assembly on explosion-proof models.
Diagram showing the left heavy-duty clamp assembly components.
Diagram and part list for the 0-5153-00 Counter Base Assembly.
Diagram and part list for the 0-5151-00 Pedestal Base Assembly.
Identifier for the 'air requirements' warning decal.
Note regarding replacement air filter elements and where to obtain them.
List of equipment models covered by the Red Devil Equipment Co. warranty.
General statement of Red Devil Equipment Co.'s warranty against defects in material and workmanship.
Limitations and disclaimers regarding the scope and liability of the warranty.
Exclusions from the warranty, particularly for accessories or components not manufactured by Red Devil Equipment Co.
