Do you have a question about the red lion G306 and is the answer not in the manual?
Brand | red lion |
---|---|
Model | G306 |
Category | Touch terminals |
Language | English |
Details power supply requirements, voltage, and power consumption for the unit.
Specifies the lithium coin cell battery and its typical lifetime.
Lists display specifications like size, type, colors, pixels, and brightness.
Mentions the 5-button keypad for on-screen menus.
Describes the resistive analog touchscreen for user input.
Details on-board memory and CompactFlash card slot.
Covers USB, Serial Ports (PGM, COMMS), Ethernet, and DH485.
Lists operating/storage temperature, humidity, vibration, shock, and altitude.
Lists safety and EMC certifications like UL, CSA, IEC, EN standards.
Describes the steel rear and aluminum front panel construction.
Specifies panel thickness and mounting stud torque.
States the product's weight.
Details through-panel mounting, gasket use, and tightening torque.
Explains bonding the chassis ground terminal to external protective earthing.
Covers 24 VDC supply, placement, wiring gauge, and SELV ratings.
Explains configuration via Crimson software, RS232 PGM, USB, or CompactFlash.
Describes driver installation and data transfer process via USB.
Provides pinout details for connecting G3 RS232 ports to a PC.
Shows wiring and switch settings for connecting to an ICM5 unit.
Detailed pinout diagrams for Power, Ethernet, COMMS, and PGM ports.
Wiring diagrams for RS422/485 4-wire communication.
Wiring diagrams for RS485 2-wire communication.
Notes on using the RS422/485 port for Allen Bradley DH485.
Pinout for connecting G3 to AB SLC 500 using specific cable.
Wiring examples for RS485 2-wire connections to other Red Lion devices.
Wiring examples for connecting G3 to a Modular Controller.
Information on Crimson software, availability, and updates.
Details on the LCD display technology and backlight.
Describes the resistive analog touchscreen functionality and operation.
Explains the status indications for the PWR, YELLOW, and GREEN LEDs.
Mentions the five-key keypad for on-screen menus.
Guidance for contacting technical support for issues.
Safety warnings regarding explosion hazards during servicing.
Warnings about touching the inverter board due to high voltage.
Precautions for handling static-sensitive components on the circuit board.
Information on optional communication cards for fieldbus and serial communications.
Details on applying custom logos to the operator interface.
Information on CompactFlash card compatibility and usage.