red lion IAMS 0001 - IAMS 0001; 0011; 0010 Overview; Advanced Features; Application Areas; Technical Characteristics

6
IAMS 0001 / 0011 / 0010
• Input for RTD, TC, Ohm, potentiometer, mA and V
• 2-wire supply > 16 V
• FM-approved for installation in Div. 2
• Output for current, voltage and 2 relays
• Universal AC or DC supply
Advanced features
• Programmableviadetachabledisplayfront(PGMMOD00),process
calibration, signal and relay simulation, password protection, error diagnostics
and selection of help text in several languages.
Application
• Linearised,electronictemperaturemeasurementwithRTDorTCsensor.
• Conversionoflinearresistancevariationtoastandardanaloguecurrent/volt
age signal, i.e. from solenoids and butterfly valves or linear movements with
attached potentiometer.
• Powersupplyandsignalisolatorfor2wiretransmitters.
• Processcontrolwith2pairsofpotentialfreerelaycontactsandanalogue
output.
• Galvanicseparationofanaloguesignalsandmeasurementoffloatingsignals.
• TheIAMS0001andIAMS0011havebeendesignedaccordingtostrictsafety
requirements and are thus suit able for application in SIL 2 installations.
Technical characteristics
• WhenthedevicesareusedincombinationwiththePGMMOD00display/
programming front, all operational parameters can be modified to suit any
application. As the devices are designed with electronic hardware switches, it
is not necessary to open them for setting of DIP-switches.
• Agreen/redfrontLEDindicatesnormaloperationandmalfunction.Ayellow
LED is ON for each active output relay.
• Continuouscheckofvitalstoreddataforsafetyreasons.
• 4port2.3kVACgalvanicisolation.