RAM 9000 Series Hardware Guide 5-20
Product Overview Revised 2015-07-16
Specifications
• Input current @ 24 VDC = 10 mA
• Filtered ON/OFF delay = 25 ms (10 Hz max count rate)
• Count resolution = 16 or 32 bits
Discrete Outputs:
• 2 Channels
• Sourcing of module power 8-30 VDC
• Max. output load per channel = 1 A (up to 35°C)
• Derate to 0.7 A up to 50°C
• Derate to 0.55 A up to 70°C
• Derate to 0.4 A up to 80°C
• Derate to 0.3 A p to 85°C
• Min. output load per channel = 1 mA
• Max. OFF state leakage current = <0.05 mA
• Inrush current (100 mA surge) = 5A
• Typical ON voltage drop (@1 A) = 0.13 VDC
• Short circuit protection = self-reset fuses (trip above 1.5 Amp at 20C)
Relay Outputs Specs:
• 1 channel
• Relay type = Form C (NO/NC)
• Minimum output voltage = 0 VAC/VDC
• Maximum output voltage = 110 VDC, 125 VAC
• Minimum switching capacity = 10μA, 10 mV DC
• Maximum load current per output (30 VDC) = 2 Amps
• Maximum load current per output (125 VAC) = 0.3 Amps
• Minimum OFF resistance = 1000 Meg Ohms
• Maximum relay turn ON time = 4 ms
• Maximum relay turn OFF time = 4 ms
• Load current versus contact voltage chart:
To Next Page
Loading...