RAM 9000 Series Hardware Guide 2-40
Hardware Installation Revised 2015-07-16
SIM Cards
Step 4: Remove old battery from the holder and replace with a new battery of the proper type (see above).
Step 5: Insert battery holder with a new battery into the battery slot and push into slot until you hear and feel
it snap into place:
Step 6: Replace the battery door.
SIM Cards
The RAM 9000 has 1 or 2 SIM card sockets, depending on the model. The SIM sockets are found under a panel on
the bottom of the unit. Remove the one screw to access the SIM socket(s).
Note: The second socket (SIM2) is currently not supported. A future firmware release will
be needed to support SIM2.
To Next Page
Loading...