Need help?Do you have a question about the Red Panda PARTICLE 2 and is the answer not in the manual?
General| Bypass | True Bypass |
|---|---|
| Power | 9V DC |
| Current Draw | 250 mA |
| Input Impedance | 1 MΩ |
| Output Impedance | 1 kΩ |
| Type | Granular Delay/Pitch Shifter |
| Inputs | 1 x 1/4" (mono/TS) |
| Outputs | 1 x 1/4" (mono/TS) |
| Power Requirements | 9V DC center negative |
| Dimensions | 4.7" |
Explains the freeze functionality, its modes, and how the CHOP knob affects it.
Describes the various delay and pitch modes available on the Particle pedal.
Step-by-step guide to reset the pedal's configuration data to factory defaults.
Explains how the Particle works with USB MIDI hosts and controllers.
Provides contact information for technical assistance and details the repair process.
Outlines the terms and conditions of the product's one-year warranty.
Step-by-step guide for updating the pedal's firmware and resolving issues.
To Next Page
