Red Sea ReefDose 2 User Manual

Red Sea ReefDose
®
9
ENG
Power Status Indicator LED
Red light DC power is available.
Wi-Fi Status Indicator LED
Solid Red light ReefDose is connected to the Home network.
Blinking Red light
ReefDose is in Wi-Fi Access
Point (AP) mode (device can be discovered by Wi-Fi devices).
No Red light ReefDose Wi-Fi is off.
Double blink indicates change of status / end of process.
If indicator LED is off (ReefDose Wi-Fi is off):
Pressing button for 5 seconds (until double blink) activates Wi-Fi AP mode. The AP name is shown on the
back of the device.
If indicator LED is blinking (ReefDose Wi-Fi is in AP mode):
Pressing button for 5 seconds (until double blink) switches Wi-Fi off.
Clear Settings
Pressing the button for 15 seconds (until double blink) deletes all user settings. Complete the reset
process by disconnecting and reconnecting the DC power. (Note: before initiating "clear settings," delete
the specific ReefDose from ReefBeat via Device Manager.)
Wi-Fi Settings button and status LEDs
If indicator LED is on (ReefDose Wi-Fi is connected to a Wi-Fi network):
Pressing button for 5 seconds (until double blink) disconnects the ReefDose from the network and switches
it to Wi-Fi AP mode. (Note: before disconnecting a ReefDose from a network, delete the specific ReefDose
from ReefBeat via the Device Manager.)

Red Sea ReefDose 2 Specifications

General

Brand	Red Sea
Model	ReefDose 2
Category	Water Pump
Language	English