Red Sea ReefDose 2 User Manual

Red Sea ReefDose
®
8
Device Guide
Power Supply
Only use the power supply provided with the product.
Plug the power supply into the wall outlet or suitable power center.
Connect the DC jack of the power supply to DC inlet on the back of the ReefDose. After powering on the
unit, the Power indicator LED of the ReefDose will switch on and the Setting Indicator LED will be off.
If the power indicator LED is not working, check that the power supply is properly inserted in the wall outlet
and it is switched on.
LED Indicators
Wi-Fi Settings
Buttons
Power
status LED
Wi-fi Status LED
AP name

Red Sea ReefDose 2 Specifications

General

Brand	Red Sea
Model	ReefDose 2
Category	Water Pump
Language	English