69
15-CLEANING AND MAINTENANCE
Technical Dept. - All rights reserved - Reproduction is prohibited
CHECKING THE INTERNAL COMPONENTS
ATTENTION!
The internal electromechanical components must only be checked by qualied personnel whose technical expertise
includes combustion and electricity.
We recommend that an annual maintenance service is carried out with a scheduled service contract. This service is essentially a visual and
functional inspection of the following components:
PARTS/INTERVAL 15 DAYS* 60 DAYS* EVERY SEASON
Cleaning the brazier*
Cleaning the rebox*
Cleaning the trolley
.
Cleaning the ash tray
.
Cleaning the re door and glass
.
Cleaning pipes
.
Cleaning the lower ash drawers
.
Cleaning the outlet "T" (outside the boiler)
.
Cleaning the exchangers and removing ash and
incrustations
.
Cleaning the smoke tting
.
Checking the circulation pump
.
Checking for hydraulic leaks
.
Checking the door seal
.
Checking the spark plug
.
Door closure operation
.
* The frequency of cleaning should be increased if the pellets are of poor quality.
To Next Page
Loading...
