20
4 - UNPACKING
PREPARATION AND UNPACKING
The packaging consists of a recyclable cardboard box in line with RESY standards and a wooden pallet. All packaging materials can be
reused for similar use or eventually disposed of as urban solid waste, in compliance with the regulations in force.
After having removed the packaging make sure the product is intact.
Handle the product with suitable means paying attention to the applicable safety regulations in force.
The stoves are delivered in a single package with steel sides packaged together with the structure and placed at the side. Open the
package, remove the cardboard, polystyrene and any straps and position the stove in the preset place making sure that it complies with
the requirements. Remove the strap that secures the top to the stove (inserted for stove safety during transport).
Always handle the body of the stove in an upright position with trucks only. Pay particular attention to the door and its glass, protecting
them from mechanical knocks that would compromise their integrity.
If possible, unwrap the stove near the chosen area of installation.
The packaging materials are neither toxic nor harmful.
In order to remove the ERICA stove from the pallet it must be slightly lifted so the feet come out of the packaging.
FIGURE 1 - STOVE PACKAGING (FRONT VIEW) FIGURE 2 - STOVE PACKAGING + SIDE AND FRONT PANELS
To Next Page
Loading...
