HH
L
L
U
U
U
U
U
U
U
26
6 - CLADDING ASSEMBLY
Take an “L” side and position it at the front so that:
• rst, loosen screws “U” that are screwed onto the structure (screws required to x the sides “L” and “M”)
• the front of the “L” side must be resting externally onto bracket “H”
• the top part of the “L” side must be resting onto the cover of the structure.
NOTE: Before tting the rebox door ensure the screws “U” are completely screwed in to prevent damaging the door.
To Next Page
