RED PRIMULA - Initial Start-Up and Failed Start-Up Handling

37
8 - MENU ITEMS
Technical Dept. - All rights reserved - Reproduction is prohibited
c - Feed screw loading
To select “Feed screw loading” (only when the boiler is switched o) act as follows:
• Press the “menu” button.
• Scroll to “Settings” using the arrows
• Press “menu” to conrm.
• Scroll to “Feed screw loading” using the arrows.
• Press “menu” to conrm.
• Select “Enable” with the + - keys.
• Press “menu” to conrm and “esc” to exit.
d - Tones
This function is disabled by default, so to enable act as follows:
• Press the “menu” button.
• Scroll to “Settings” using the arrows
• Press “menu” to conrm.
• Scroll to “tones” using the arrows.
• Press “menu” to conrm.
• Select “On” with the + - keys.
• Press “menu” to conrm and “esc” to exit.
e - External thermostat (see relative chapter)
f - Auto-Eco activation
To select the Auto-Eco function act as follows:
• Press the “menu” button.
• Scroll to “Settings” using the arrows
• Press “menu” to conrm.
• Scroll to “Auto-Eco” using the arrows.
• Press “menu” to conrm.
• Select “On” with the + - keys.
• Press “menu” to conrm and “esc” to exit.
g - Eco Shutdown t
To select the Eco - shutdown t function act as follows:
• Press the “menu” button.
• Scroll to “Settings” using the arrows
• Press “menu” to conrm.
• Scroll to “Eco - shutdown t” using the arrows.
• Press “menu” to conrm.
• Enter the minutes with the + - keys.
• Press “menu” to conrm and “esc” to exit.