RED PRIMULA - Pellet Loading Procedure

39
8 - MENU ITEMS
Technical Dept. - All rights reserved - Reproduction is prohibited
o - Components test
To activate the “Components test” function (only when the boiler is switched o) act as follows:
• Press the “menu” button.
• Scroll to “Settings” using the arrows
• Press “menu” to conrm.
• Scroll to “Components test” using the arrows.
• Press “menu” to conrm.
• Select the test to be performed with the + - keys
• Press “menu” to conrm and “esc” to exit
p - Chimney sweep function
To activate the “Chimney sweep” function act as follows:
• Press the “menu” button.
• Scroll to “Settings” using the arrows
• Press “menu” to conrm.
• Scroll to the “Chimney sweep” function using the arrows.
• Press “menu” to conrm.
• Select “On” with the + - keys (O by default)
• Press “menu” to conrm and “esc” to exit
q - System conguration
To change the system conguration act as follows:
• Press the “menu” button.
• Scroll to “Settings” using the arrows
• Press “menu” to conrm.
• Scroll to “System conguration” using the arrows.
• Press “menu” to conrm.
• Change the conguration from 01 to 05 with the + - keys
• Press “menu” to conrm and “esc” to exit.
r - Season
To change the function act as follows:
• Press the “menu” button.
• Scroll to “Settings” using the arrows
• Press “menu” to conrm.
• Scroll to “Season” using the arrows.
• Press “menu” to conrm.
• Select “Summer” or “Winter” with the + - keys.
• Press “menu” to conrm and “esc” to exit.