Redarc GoBlock PPS12050 User Manual

24 | REDARC RedVision® App
SUBSEQUENT CONNECTIONS
Once a smartphone has been paired with a GoBlock, it will automatically reconnect when the
RedVision
®
App is opened and the GoBlock is selected from the list of available REDARC products.
PAIRING GoBlock TO MULTIPLE SMARTPHONES
The GoBlock can be paired to multiple smartphones, however it can only be monitored/controlled
by one smartphone at a time. When the RedVision
®
App is minimised on one smartphone, the
RedVision
®
App can be opened on another smartphone and will connect automatically if it has
previously been paired.
To pair another smartphone, repeat the steps in 'Pair to the GoBlock Via Bluetooth' (page23).
DELETE ALL PAIRINGS
1. Enter Bluetooth
®
pairing mode — press and hold the Control Button on the GoBlock until the
Control Button LED begin to flash blue, then release the button.
2. Press and hold the Control Button for fourseconds or longer. The Battery Level LEDs will
illuminate in order from bottom to top. Continue pressing the button until all LEDs (Control
Button and Battery Level LEDs) flash rapidly 10 times. All pairings have now been deleted.
CONTENTS

Redarc GoBlock PPS12050 Specifications

General

Brand	Redarc
Model	GoBlock PPS12050
Category	Camera Accessories
Language	English