Redarc GoBlock PPS12050 - Inverter Connectivity; Connecting and Using Inverters

Inverters | 31
INVERTERS
An inverter can be connected to the Anderson Output on the front of the GoBlock to charge/power
higher-draw devices such as laptops.
The GoBlock is limited to 50A from the Anderson Output. A 700W inverter can be connected
safely, however the GoBlock will not be able to supply the maximum 700W. It is not recommended
to connect an inverter larger than 700W.
Check the power consumption of any loads you want to plug into your inverter and make sure your
inverter is capable of supplying it. Many common household appliances draw higher power than the
PPS/Inverter setup can supply.
Recommended Inverter Setup:
 REDARC 350W Pure Sine Wave Inverter
 PPSKIT-001 GoBlock to Inverter Cable
Connecting the GoBlock to an inverter.
CONTENTS