EasyManua.ls Logo

Redlion Graphite Series - User Manual

Default Icon
4 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Bulletin No. G10-G
Drawing No. LP0909
Revised 03/2023
Model G10 - Graphite
®
Series 10" Color
Touchscreen Operator Interface Terminal
Installation Guide
1
10.84 (275.2)
8.57
(217.7)
2.06 (52.4)
8.8
(224)
(MOUNTING CLIPS INSTALLED)
11.1 (281)
2.97 (76)
Module sold
separately
DIMENSIONS In inches (mm)
See the Red Lion website at www.redlion.net for full user manual,
Crimson
®
software and software manual.
SAFETY SUMMARY
All safety related regulations, local codes and instructions that
appear in this document or on equipment must be observed to
ensure personal safety and to prevent damage to either the
device or equipment connected to it.
Do not use these products to replace proper safety interlocking.
No software-based device (or any other solid-state device) should
ever be designed to be responsible for the maintenance of
personnel safety or consequential equipment not equipped with
safeguards. Red Lion disclaims any responsibility for damages,
either direct or consequential, that result from the use of this
equipment in a manner not specified.
ORDERING INFORMATION
DESCRIPTION PART NUMBER
10" Color Touch Screen, Indoor Use G10C0000 *
10" Color Touch Screen, Indoor Use, Additional Ethernet Port G10C1000 *
10" High Resolution Display, Color Touch Screen, Indoor Use G10R0000
10" High Resolution Display, Color Touch Screen, Indoor Use,
Additional Ethernet Port
G10R1000
10" Color Touch Screen, Indoor/Outdoor Use G10S0000
10" Color Touch Screen, Indoor/Outdoor Use, Additional
Ethernet Port
G10S1000
* These products have obtained CCC certification.
CAUTION: Risk of Danger.
Read complete instructions prior to
installation and operation of the unit.
WARNING - EXPLOSION HAZARD - Do not disconnect
equipment unless power has been switched off or area is
known to be non-hazardous.
WARNING - EXPLOSION HAZARD - Substitution of
components may impair suitability for Class I, Division 2
II 3 G Ex ic nA IIC T4 Gc
II 3 D Ex tc IIIC T135°C Dc
-20°C
AMB

DEMKO 14 ATEX 1387X
IECEx UL 15.0035X
UL22UKEX2574X
Ex ic ec IIC T4 Gc

For G10C0000 and G10C100 only.
FOR USE IN HAZARDOUS LOCATIONS:
Class I, Division 2, Groups A, B, C, and D
Class II, Division 2, Groups F and G
Class III, Division 2
T4
C
C
US
US
U
L
R
LISTED
IND.CONT. EQ.
E302106
E317425
Question and Answer IconNeed help?

Do you have a question about the Redlion Graphite Series and is the answer not in the manual?

Summary

Ordering Information

Dimensions

Specifications

Power Requirements

Details the power input voltage and consumption for the G10 series.

Environmental Conditions

Specifies operating and storage temperature, vibration, shock, and humidity.

Certifications and Compliances

Lists regulatory approvals, standards, and certifications met by the unit.

Operator Interface Installation

Mounting Instructions

Provides guidance for through-panel mounting and gasket installation.

VESA Mount Dimensions

Details dimensions for VESA mounting options on the unit's rear.

Connecting to Earth Ground

Power Supply Requirements

I;O Module Installation

SD Card Insertion;Removal

Instructions for inserting and removing the SD card from the unit.

Communicating with the G10

Configuring a G10

Explains configuration via Crimson software using USB, PGM, or SD card.

USB Data Transfers from SD Card

Details on transferring data from the SD card using the USB port.

Battery and Time Keeping

Changing the Battery

Step-by-step instructions for replacing the unit's internal battery.

Technical Support

Redlion Graphite Series Specifications

General IconGeneral
Display TypeTFT LCD
Operating Temperature0°C to 50°C
Communication PortsEthernet, USB, Serial
CertificationsCE, UL, cUL
Display Size7", 10.4", 12.1", 15"