US-16
CHT220/CHT220L
9. Maintenance
■ CLEANING AND LUBRICATION
Clean any resin and plant residue from the blades using
cleaning agent 531 00 75-13 (UL22) before and after using
the machine.
Check that the blade edges are not damaged or deformed.
File away any burrs.
Check that the blades move freely. Remove the lubrication
plug in the gear housing and stick in the combination
spanner and turn back and forth.
Lubricate the blade bars with special grease, part no.
531 00 75-12 (UL 21) before long periods of storage.
IMPORTANT! Use only RedMax replacement parts.
Use of other brands of replacement parts can
cause damage to your unit or injury to the operator
or others. Your warranty does not cover damage or
liability caused by the use of accessories and/or
attachments not specifically recommended by
RedMax.
To Next Page
Loading...
