RedMax CHT2200 User Manual

The engine exhaust from this product
contains chemicals known to the State
of California to cause cancer, birth
defects or other reproductive harm.
WARNING
OWNER/OPERATOR MANUAL
HEDGE-TRIMMERS
HT2200
CHT2200
Thank you for purchasing a RedMax
product.
Before using our hedge-trimmers,
please read this manual carefully to
understand the proper use of your unit.
848-D13-93A1 (501)
HT2200 CUTTING UNIT 900101 and up ENGINE UNIT 50100000 and up
CHT2200 CUTTING UNIT 900101 and up ENGINE UNIT 50100000 and up
APPLICABLE SERIAL NUMBERS :

RedMax CHT2200 Specifications

General

Brand	RedMax
Model	CHT2200
Category	Trimmer
Language	English

Summary

Safety Precautions

General Safety Guidelines

Essential safety rules for operating the hedge-trimmer.

Personal Protection and Fuel Safety

Protective gear and safe handling of gasoline.

Operational Safety and Checks

Pre-operation checks, starting procedures, and noise.

Safe Usage and Maintenance

Proper usage techniques, hazard avoidance, and maintenance safety.

Parts Location & Specifications

HT2200 Specifications

Detailed specifications for the HT2200 model.

CHT2200 Specifications

Detailed specifications for the CHT2200 model.

Emission Control Label

Set Up

HT2200 Assembly

Step-by-step instructions for assembling the HT2200 model.

CHT2200 Assembly

Step-by-step instructions for assembling the CHT2200 model.

Fuel

Recommended Mixing Ratio

Guidance on the correct gasoline and oil mixture.

How to Mix Fuel

Detailed steps for preparing the fuel mixture.

Fueling the Unit

Safe procedures for filling the fuel tank.

Operation

Starting the Engine

Procedures for safely starting the hedge-trimmer engine.

Stopping the Engine

Correct methods for shutting down the engine.

Adjusting Idling Speed

How to set and adjust engine idle speed.

How to Use

Techniques for effective hedge-trimming.

Maintenance

Routine Inspections and Checks

Daily checks, gear case, air filter, and spark plug.

Engine Component Care

Muffler, spark arrester, and cooling vent maintenance.

Periodic Maintenance Tasks

Procedures for 100-hour intervals.

Storage

Parts List

Fig.1 Cutter Group - HT2200

Diagram and parts for the HT2200 cutter assembly.

Fig.2 Engine Group - HT2200

Diagram and parts for the HT2200 engine assembly.

Fig.3 Cutter Group - CHT2200

Diagram and parts for the CHT2200 cutter assembly.

Fig.4 Engine Group - CHT2200

Diagram and parts for the CHT2200 engine assembly.

Limited Warranty