Why is my RedMax Trimmer engine hard to start?
- DDarlene ShortNov 2, 2025
If your RedMax Trimmer's engine is hard to start, several factors could be the cause. It might be due to a blocked fuel filter, which you can resolve by cleaning or replacing it. Alternatively, a blocked fuel hose could be the culprit; inspect and clear any obstructions. Air in the fuel pipes can also cause starting issues, so bleed the fuel system to remove any air. Ensure you are using the correct type of fuel. Other potential causes include a defective or worn needle valve (replace it), a damaged or improperly operating lever arm of the needle valve (repair, adjust, or replace it), a damaged control diaphragm or defective seal (replace them), or a blocked needle valve or object in the needle valve guide (clear the blockage or remove the object). Finally, check and adjust the stop screw ...













