28
7. Operation
English
■ HOW TO USE
HANDLE (CHTZ2401 only)
To reduce fatigue when trimming hadges, the handle
can be swivelled through 90° to the left or right. (OP7,
OP8).
Do not press the throttle during this operation !
Proceed as follows:
1. Free the handle by pressing the locking lever; (OP7)
2. Turn the handle until the locking lever clicks into
place;
3. When the handle is locked in its new position, you
can apply the throttle again.
(1) handle
(2) locking lever
You can swivel the handle even with the engine idling
because the hedge-trimmer is equipped with a blade
brake that maintains the blades at a standstill.
OP8
OP7
To Next Page
Loading...
