RedMax CZT61 - Technical Data; Machine Specifications Overview

ENGINE
Manufacturer Kawasaki
Type FS730
Power
24 hp
1)
Lubrication Pressure with oil lter
Fuel Min 87 octane unleaded (Max ethanol 10%, Max MTBE 15%)
Fuel tank capacity 5 gallons 18.9 litres
Cooling Air cooled
Air lter Heavy duty canister
Alternator 12v 15 amp @ 3600 rpm
Starter Electric
TRANSMISSION
Transmission HydroGear ZT3400
Steering control Dual levers, foam gripped
Speed forward 0-10 mph 0-16,1 km/h
Speed reverse 0-4.5 mph 0-7.2 km/h
Brakes Mechanical Park Brake
Front caster tires 13 x 6.50-6
Rear tires, turf pneumatic 23 x 10.50-12
Tire pressure 15 PSI / 103 kPa / 1 bar
FRAME
Cutting Width 61" 155 cm
Cutting Height 1-1/2" - 4-1/2" 3.8 cm - 11.4 cm
Number of Blades 3
Blade Length 21" 53.23 cm
Anti-scalp roller 2 adjustable
Nose roller Yes
Sprung Seat Standard
Hinged Arm Rests Yes
Service Meter Digital
Blade Engagement Clutch 200 ft/lbs
Deck Construction 7 gauge fabricated
Productivity 4.9 acres/h
19,827 m
2
/h
DIMENSIONS
Weight 790 lbs 359 kg
Base Machine Length 75-1/2" 192 cm
Base Machine Height 42" 107 cm
Base Machine Width 49" 125 cm
Overall Width, Chute Up 61-1/4 155 cm
Overall Width, Chute Down 76" 193 cm
Overall Height, ROPS up 73" 185 cm
1)
The power rating as declared
by the engine manufacturer
is the average gross power
output at the specied
RPM of a typical production
engine for the engine
model measured using
SAE Standards for engine
gross power. Refer to the
engine manufacturer engine
specications.
34
TECHNICAL DATA