EasyManua.ls Logo

RedMax HEZ230S User Manual

RedMax HEZ230S
64 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
OWNER'S/OPERATOR'S
MANUAL
MODE D’EMPLOI MANUAL DE
INSTRUCCIONES
STICK EDGERS
COUPE-BORDURES
CORTACÉSPEDES
114 13 04-49
WARNING
The engine exhaust from this
product contains chemicals
known to the State of California to
cause cancer, birth defects or
other reproductive harm.
WARNING
AVERTISSEMENT
AVERTISSEMENT
ADVERTENCIA
ADVERTENCIA
Before using our products,
please read this manual carefully
to understand the proper use of
your unit.
Los gases de escape del motor de
este producto contienen
sustancias químicas conocidas
por el Estado de California como
causantes de cáncer,
malformaciones en recién nacidos
y otros problemas de
reproducción.
Les échappements du moteur de
ce produit contiennent des
produits chimiques connus par
l’Etat de Californie comme étant
responsables de cancers,
d’anomalies congénitales et
d’autres atteintes à l’appareil
reproducteur.
Antes de usar nuestros productos,
lea detenidamente este manual a
fin de familiarizarse con el uso
correcto de este aparato.
Avant d’utiliser cette
ce produit
,
veuillez lire attentivement ce
manuel afin de bien comprendre le
bon fonctionnement de cet
appareil.
HEZ230S
U
S
F
R
E
S
This spark ignition system complies with
the Canadian standard ICES-002.
Ce système d’allumage par étincelle de véhicule
est conforme à la norme NMB-002 du Canada.
Este sistema de ignición por chispa de vehículo
es conforme con la norma ICES-002 del Canadá.
Question and Answer IconNeed help?

Do you have a question about the RedMax HEZ230S and is the answer not in the manual?

RedMax HEZ230S Specifications

General IconGeneral
BrandRedMax
ModelHEZ230S
CategoryLawn Mower
LanguageEnglish

Summary

Safety and Warning Information

Warning Symbol Explanations

Explains warning symbols and their meaning.

Manual Indicator Definitions

Defines symbols like WARNING, IMPORTANT, NOTE.

Parts and Specifications

Component Identification

Identifies all parts of the stick edger with corresponding numbers.

HEZ230S Model Specifications

Lists dimensions, weight, engine type, displacement, and other technical data.

On-Machine Safety Labels

Warning Label Explanations

Describes the meaning of different warning symbols on the product.

Operational Symbol Guide

Details symbols related to fuel, choke, and general operation.

Safe Operation Guidelines

General Safety Precautions

Covers risks, modifications, work schedule, and health advice.

Basic Safety Rules

Lists essential rules like operating while fatigued, weather conditions, and protective gear.

Safe Operation Guidelines

Operating Practices and Area Checks

Details handling the machine, stopping the engine, and working area checks.

Engine Starting Procedures

Explains how to safely start the engine with correct throttle and choke settings.

Safe Operation Guidelines

Handling and Balance Guidelines

Covers body balance, hand grip, and keeping parts away from the blade.

Fuel Safety and Storage

Provides instructions on handling fuel, storing gasoline, and preventing leaks.

Safe Operation Guidelines

Vibration Protection Measures

Advises on preventing whitefinger disease through proper usage and gear.

Maintenance and Disposal

Outlines general maintenance, part replacement, and proper disposal methods.

Safe Operation Guidelines

Engine Startup Warnings

Warns about exhaust fumes and starting locations.

Equipment Setup Procedures

Handle and Blade Installation

Details how to attach the handle and cutting blade correctly.

Fuel Requirements

Gasoline Specifications and Safety

Details required gasoline octane, ethanol content, and risks of low octane fuel.

Oil Specifications and Mixing

Specifies the type of oil and the correct mixing ratio for the engine.

Fuel Management

Fuel Storage and Mixing

Advises on storing fuel mixtures and provides a mixing chart.

Refueling Procedures and Safety

Explains how to safely refuel the unit and precautions for engine longevity.

Product Operation

Wheel Height Adjustment

Describes how to set the cutting depth using the wheel adjustment.

Engine Starting Sequence

Provides step-by-step instructions for safely starting the engine.

Product Operation

Stopping and Adjustments

Explains how to stop the engine and adjust throttle cable and idling speed.

Edging Technique Guide

Gives instructions on positioning, blade engagement, and safe cutting practices.

Maintenance Overview

Pre-Use Checks

Lists items to check before each use, like the edging mechanism and fuel tank.

Routine Maintenance Procedures

Outlines periodic maintenance procedures for engine and shaft components.

Maintenance Details

Spark Plug and Muffler Maintenance

Explains how to clean/replace the spark plug and inspect the muffler.

Spark Arrester Maintenance

Details the inspection and cleaning of the spark arrester.

Maintenance Details

Gear Case, Blade, and Vent Maintenance

Covers greasing the gear case, blade installation, and cleaning cooling vents.

100-Hour Maintenance Procedures

Lists procedures to be performed after every 100 hours of use.

Storage and Disposal

Unit Storage Recommendations

Advises on storing the unit, especially with aged fuel.

Disposal Guidelines

Directs users to follow local regulations for disposing of the machine.

Troubleshooting Common Issues

Starting Failure Diagnosis

Lists problems with starting the engine and their probable causes and actions.

Warranty Information

Emissions Warranty Coverage

Explains what is covered under the emissions control system warranty.

Owner Responsibilities and Claims

Outlines owner's duties for maintenance and how to file a warranty claim.

Warranty Information

Emission Parts List

Lists specific parts covered under the emissions warranty.

Warranty Exclusions and Modifications

Details what is not covered by the warranty, including abuse and modifications.

Product Registration

Online Registration Process

Guides users on how to register their RedMax product online for updates and support.

Related product manuals