REDRAGON MIRAGE M690 User Manual

User Manual
MIRAGE WIRELESS GAMING MOUSE
M690
Feature
◆ 2.4GHZ wireless connection, working range up to 10 meters
◆ USB high speed data transfer, polling rate up to 500Hz,
125Hz/250Hz/500Hz 3 level for option
◆ Pixzart 3330 sensor meet gaming user demand, low power, high
performance
◆ 6 DPI：800/1200/1600/2400/3200/4800 CPI， With DPI indicator，
default in 1200DPI
◆ RF motion detecting light sources
◆ programmable buttons(Left key is not available)
◆ Multi-stage power saving mode, support power on/power off
◆ Back lighting with sleep mode function
◆ Low power indicator
◆ Nano receiver, plug and play
Before use:
1. Find the wireless mouse and Nano receiver in package
2. Plug Nano receiver to USB port on PC
3. Switch the button at the bottom of mouse body, battery cover can be open (check the
pictures), Install 1PCS AA battery into Mouse body Properly
4. Put on power switch at the bottom of Mouse, LED indicator will keep flash for few
second, the Mouse is ready to work.
Product specification
1. DPI adjustable function
With 6 adjustable DPI
800/1200/1600/2400/3200/4800 , factory setting is

REDRAGON MIRAGE M690 Specifications

General

Type	Gaming Mouse
Sensor	Optical
Polling Rate	1000Hz
Weight	120g
Backlight	RGB
Cable Length	1.8m
Buttons	7
Compatibility	Windows
Connectivity	Wired (USB)

Summary

Mouse Features Overview

Wireless Connectivity and Performance

2.4GHz wireless connection up to 10m, USB high speed data transfer, 500Hz polling rate with 3 levels.

Sensor and DPI

Pixzart 3330 sensor for gaming, 6 adjustable DPI levels (800-4800) with indicator.

Additional Features

RF motion detection, programmable buttons, power saving, sleep mode backlighting, low power indicator, plug-and-play Nano receiver.

Getting Started

Initial Setup Steps

Instructions to find receiver, connect to PC, install battery, and power on the mouse.

Product Specifications

DPI Adjustment

With 6 adjustable DPI 800/1200/1600/2400/3200/4800 factory setting is

Polling Rate Adjustment

3 polling rate 125Hz/250Hz/500HZ can be adjust, default as 500HZ.

Power Management

Saving power mode after 8 minutes idle, power switch at mouse bottom, backlight off for economy.

Nano Receiver

Very small size, plug and stay on USB port, portable design, can plug into slot next to battery.

Customized Button Function

The button function can be set by software(Left key is not available).

Reconnection Procedure

Reconnection Steps

Steps to reconnect mouse and receiver by plugging receiver, moving mouse close, and pressing key within 15s.

FCC Statement