Redsbaby Bounce - Seat Reversing and Reclining; Bassinet Reversing; Tether Strap Usage; Safe Lifting and Carrying

18
WARNING:
• Use the tether strap to stop the Redsbaby Bounce rolling away.
Reversing and reclining the seat
IMPORTANT: Do not reverse or recline the seat when a child is in the
seat.
1. To recline, press and hold both round buttons on the side of the seat
and move into the desired position. When in place, you will hear and feel
arm‘click’.
2. To reverse, remove the seat unit by pressing the rectaingular release
buttons on either side of the seat unit and lift upwards. When the release
locksaredisengaged,youwillhearandfeelarm‘click’.Theseatunit
canbettedeitherrearorforwardfacing.
Reversing the bassinet
IMPORTANT: Onlyusethebassinetintheatposition.Donotrecline.
To reverse, remove the bassinet by pressing the rectangular release
buttons on either side of the bassinet unit. When the release locks are
disengaged,youwillhearandfeelarm‘click’.Thebassinetunitcanbe
ttedeitherrearorforwardfacing.
Using the tether strap
Attach the tether strap to your wrist at all times when using the Redsbaby
Bounce.
Lifting and carrying the Redsbaby Bounce safely
IMPORTANT: Do not lift or carry the Redsbaby Bounce when a child is in
it.
IMPORTANT: Do not lift or carry the Redsbaby Bounce when fully
assembled. Only lift and carry when folded. For folding instructions, refer
to page 13.