9
Assembly instructions
Frame
To release the frame from the folded position:
1. Place frame on the ground and position yourself behind the handle bar.
2. Pull back on the two frame fold latches located on either side of the
frame simultaneously.
3. Holding the frame on either side of the disengaged frame fold latches,
gently lift the frame continuing until the frame locks into place. When the
framehasbeenfullyopened,youwillhearandfeelarm‘click’.
Brake component
Align the brake component with the two rear ends of the pram. Click
the brake component into place. Ensure that the brake component is
assembled correctly by checking the two silver locking pins located on
the underside of the rear brake component are in place.
1
1
2 3
To Next Page
Loading...
