ASSEMBLING AND USING THE MAIN (UPPER) ADAPTORS
1. Secure the upper L and R adaptors into the upper position of the
frame. (Fig 1)
2. Secure the bassinet (with bassinet adaptors) or main seat or capsule
(with capsule adaptors) into the upper adaptors using ONLY the
approved configurations on page 11 of this manual.
3. Place one child into the bassinet; or secure your child in the capsule or
main seat.
Fig 1
WARNING:
When using the Redsbaby JIVE
2
with one (1) child only,
do not use the main (upper) adaptors as it may cause
the pram to become unstable and tip over.
To Next Page
Loading...
