Redsbaby Metro Stroller - Front Swivel Wheel Assembly; Seat and Bumper Bar Assembly

12
Front swivel wheels
Fit the front swivel wheels by inserting them into the front wheel housing located at the
front of the frame. You will hear and feel a rm ‘click’ when the wheels are locked in place.
Assembling the seat and bumper
1. The seat fabrics will come assembled on your Redsbaby Metro circle frame.
2. Attach the bumper by aligning the ends of the bumper with the two openings on the
circular frame. Gently push down into place until you hear and feel a rm ‘click’ on both
sides.
3. If desired, attach the canopy.