Redsbaby Metro Stroller - Engaging and Releasing the Brake; Locking Front Swivel Wheels

16
Engaging and releasing the brake
The brake is located next to the right rear wheel of the Redsbaby Metro. The brake is
identied by its red colour.
1. To engage the brake, press downwards and backwards on the brake until you feel
and hear a ‘click’.
2. To release the brake, press your foot forwards on the brake in the opposite
direction until the brake lock disengages.
IMPORTANT: Ensure you have disengaged the brake completely before pushing
your pram. If you hear a clicking sound, double check the brake lock isn’t clicking
on the rear wheel. It can be helpful to push your heel downwards on the brake in the
released position rmly to ensure the brake lock is not touching the rear wheel.
Locking the front swivel wheels
1. Press downwards on the buttons located
on top for the front wheel housing until you
hear and feel a ‘click’.
2. Push the Redsbaby Metro forwards
until you hear a second click in both front
wheels.
3. To unlock, simply press the buttons
again. When released successfully, you will
hear and feel a ‘click’.