!
REAR PANEL
(from left to right)
•
IEC SOCKET:
connect your power cable here.
•
HT FUSE:
(1A slo blow) high current fuse. Replace ONLY with same type.
•
MIDI IN & MIDI THRU:
sockets for midi communications. Midi IN receive midi
signal, Midi THRU left midi signal pass thru without modify original messages.
•
OUTPUT (+4dB):
Preamplifier main output.
•
OUTPUT (-10dB):
Preamplifier attenuated output. Very useful in case you want
to use instrument level pedals avoiding clipping.
•
REAR INPUT JACK:
plug your guitar here (parallel to front input: use one input
only at same time)
To Next Page
Loading...
