TECHNICAL FEATURES
FRONT PANEL:
(from left to right)
• STANDBY / ON SWITCH: turn the amplifier in standby mode or in operative
mode.
• RED LED: (under STANDBT / ON SWITCH): this led will indicate the state of
incoming power supply. It will turn on if everything is ok.
• GREEN LEDs: when on, clean channel is activated.
• BLUE LEDs: when on, vintage channel is activated.
• RED LEDs: when on, modern channel is activated.
POTS:
• CHANNEL 1 (clean channel): Volume, Bass, Middle, Treble, Gain.
• CHANNEL 2 (vintage channel): Gain Vintage, Volume Vintage & Treble, Middle,
Bass shared with CH 3.
• CHANNEL 3 (modern channel): Gain Modern, Volume Modern & Treble, Middle,
Bass shared with CH 2.
SWITCHES:
• CHANNEL 1: (clean channel): Bright switch (bright 1/ normal / bright 2),
• CHANNEL 2: (vintage channel): Bright switch (bright 1/ normal / bright 2).
• CHANNEL 3: (modern channel): Bright switch (bright 1/ normal / bright 2).
PUSHBUTTONS:
• CLEAN: activates clean channel.
• VINTAGE: activates vintage channel.
• MODERN: activates modern channel.
• LEAD: activates lead boost on both vintage and modern channels.
• LOOP: activates serial loop effects for all three channels.
To Next Page