07
Install Your Dash Cam
We will guide you through the installation process step by step
to ensure your dash cam is installed properly. We will prepare
the installation video of F7NP dash cam for you, you can scan the
QR code below to watch. Whether you are a first-time user or an
experienced one, this video will provide helpful tips to make the
process easy.
How to install the main body
> Start the vehicle generator, and do a bench test before officially
installing the dash cam: connect the car charger to the cigarette
lighter port and the dash cam, connect the rear camera and the GPS
bracket, and insert the MicroSD card to ensure that the dash cam
can work normally.
> Find the right spot on the front windshield. Wipe the pre-installed
location with a clean cloth.
To Next Page
Loading...
