EasyManua.ls Logo

Redtiger F7NP - Parking Mode Troubleshooting

Redtiger F7NP
44 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
24
Parking Mode ( Optional )
B+
B+
Ground
ON
Always On
PARTICULAR WRONG CONNECTION
Connection Driving Parking
> The camera will run Parking Mode constantly, and your car battery
will be drained under this connection.
> The Parking Mode will be working in screen off status. It will begin
recording if there is a collision or vibration triggered by the Sensor.
> Please check if your camera working after 15mins your car is off
(Because some cars have a delayed power-off function, 15 minutes
later you can ensure that the ACC interface has been powered off).
FAQ
Q1: After installing the hardwire kit, it can enter the parking
monitoring mode, but it cannot be turned on with the car starting,
and the dash cam needs to be turned on manually, why?
A1: Because your hardwire kit's yellow wire is connected to the
wrong place.
Q2: I have installed the hardwire kit, but the dash cam still prompts
that the parking monitoring mode cannot be entered, why?
A2: The first reason is that your red and yellow wires are wired
incorrectly. The second reason is that the red wire of the hardwire kit
is broken and there is no power.

Related product manuals