25
Customizing Your T700
NOTE
If your car does not have a reversing system and you need a backup
reversing system as an aid, you need to connect the red cable of
the rear cam to the positive pole of your reversing lamp. If your car
already has a reversing system, you just ignore the red cable onthe
rear cam.
When you shift to "r" gear, the rear view will automatically showon
the screen with reversing lines for easy and safe parking. Youcan
enter the "Reversing line" option in the settings, then adjust the
angle of the reversing image and the reversing line.Also when
inreversing, you can adjust the viewing angle of the image.
(This function activate after the red wire of the rear camera be
connectedto the positive pole of the reversing light.)
To Next Page
Loading...
