Fusion TREADMILL
5
HARDWARE COMPARISON CHART
Hardware Pack:
The hardware fitting and tools required for assembly are packed in a bag with in the main carton. These are referenced by
a numerical code as outlined in the parts list (page 6). The pack configuration is shown below in order to ease
identification. Please open the bag carefully and place them on a piece of card, as below, to easily identify the parts
before assembly.
NOTE: We suggest that you do not open the hardware pack until you are ready to assemble your FUSION TREADMILL .
When you open the pack, please do so carefully to ensure that the pieces remain in their position by their identification
numbers.
NO. DESCRIPTION QTY.
802
810 811809
A
B
804
C
D
802 8
∮3.5×16mm Screw
804 M8x 18mm Bolt 6
∮4×16mm Screw
809 4
810 M8x 50mm Bolt 2
∮8 Washer
811 8
A Wrench 1
B 5mm Allen Wrench 1
C 1
Safety Key
D 1
Power Cord
MILIMETERS
To Next Page
Loading...
