Reebok i-run s - Getting Started and Operation; Power On and Safety Key; Sleep Mode and Quick Start

POWER ON
After connecting the power cord switch the power button on. The LCD screen will light up.
SAFETY KEY
The safety key must be inserted into the slot on the console in order to operate the treadmill. Always insert the safety
key and attach the clip to your clothing at your waist before beginning your workout.
If you should encounter problems and need to stop the motor quickly, simply pull on the cord to disengage the safety
key from the console. To continue set the speed controller to stop and then reinsert the safety key into the console, then
press start.
SLEEP MODE
When the power is ON the computer will automatically enter POWER OFF MODE if it is left idle for 5 minutes, press any
button to return to the power on status when the computer is in the POWER OFF MODE.
COMPUTER OPERATION
Power on – “P1” (manual) will flash in the LCD display. Press SPEED UP / DOWN keys for desired program.
Please refer to the following instructions for different program options.
QU ICK S TART
Press the START key directly to start exercise without a function value.
GB