TT3.0 TREADMILL APP FUNCTION
**Available on TT3.0 Treadmill only**
The Titanium Treadmill TT3.0 is fitted with a Bluetooth receiver and can connect to many iOS and
Android devices. Please see SUPPORTED DEVICES section to check your device compatibility.
When the Pafers Treadmill monitor app and run on earth apps are downloaded from the APP store
and installed the user can monitor their workout.
APPLE DEVICE
This Treadmill has an i-Pod/pad connection wire via a USB port on the computer; the user can
place the i-Pod/Pad onto the treadmill computer and connect directly. This will allow the user to
use the device functions whilst exercising, the i-pad will also charge when connected.
*Please note the device will charge, but will not be docked with the Treadmill*.
PAIRING VIA BLUETOOTH
1 Place the i-pad onto the holder of Treadmill computer.
2 Go into Settings on the ipad
3 Select Bluetooth, the iPad will detect all Bluetooth devices that are within range. Locate the
TT3.0 Treadmill and select to pair.
*If for any reason you do not recognise the name of the Treadmill please contact your local
office for further advice*.
UK
To Next Page
Loading...
Need help?
General
