EasyManua.ls Logo

Reece Milli Pure User Manual

Default Icon
5 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
MILLI PURE VERTICAL SINGLE HEATED
TOWEL RAIL 900X38 - CHROME
900
38
ø
60
CLEANING RECOMMENDATIONS
We recommend the use of a soft dry cloth.
This product should not be cleaned with abrasive materials or cleaning agents.
Damage caused by improper treatment is not covered by the product warranty - refer
to warranty conditions.
SPECIFICATIONS
Recommended use
Domestic, hotel and commercial
Material
Copper Tube with Brass fittings
Electrical Connection
Hardwired only
Power Entry
Through wall bracket - Bottom Only
Heating Method
Water Filled
Wattage
30 watts
IP Rating
IPX5
Standard
AS/NZS: 3350
Robe Hook
Sold seperately
To see the complete MILLI range go to
www.reece.com.au/bathrooms
Dimensions are nominal measurements only.
page 1 of 5
Disclaimer: Products in this specification manual must by regulation be installed by licensed and registered trade people. The manufacturer/
distributor reserves the right to vary specifications or delete models from their range without prior notification. Dimensions are nominal
measurements only. Dimensions and set-outs listed are correct at time of publication however the manufacturer/distributor takes no responsibility
for printing errors.
Tech Page Version 1
Question and Answer IconNeed help?

Do you have a question about the Reece Milli Pure and is the answer not in the manual?

Reece Milli Pure Specifications

General IconGeneral
BrandReece
ModelMilli Pure
CategoryHeater
LanguageEnglish

Summary

Milli Pure Vertical Heated Towel Rail Specifications

Cleaning Recommendations for Milli Towel Rail

Milli Pure Towel Rail Safety Warnings

Milli Pure Towel Rail Installation Instructions

Power Entry Installation

Details on positioning the power cable for vertical and horizontal installations.

Milli Pure Towel Rail Mounting Procedure

Bracket Installation and Towel Rail Securing

Step-by-step guide for mounting brackets and securing the towel rail using grub screws.

Replacing the Heating Element

Element Replacement Steps

Six basic steps for safely and correctly replacing the heating element of the towel rail.

Milli Pure Towel Rail Hard Wiring

Connecting to Light Switch or Timer

Recommendation to connect hard-wired rails to a light switch or timer for longevity and efficiency.

Related product manuals