10
Auto Power Off
To preserve battery life, the meter is programmed to turn off after
10 minutes of inactivity.
Battery Replacement
When the low battery icon appears on the left corner of LCD display, you
will need to replace the batteries. Remove the battery cover using a
Phillips head screwdriver, insert a new 9V battery and secure the cover.
Accessories and Replacement Parts
• R2920 Surface Thermocouple Probe
• R2930 Right Angle Thermocouple Probe
• R2940 Air/Gas Thermocouple Probe
• R2950 Immersion Thermocouple Probe
• R2960 Needle Tip Thermocouple Probe
• TP-01 Beaded Thermocouple
• CA-52A Soft Carrying Case
Don't see your part listed here? For a complete list of all accessories and
replacement parts visit your product page on www.reedinstruments.com.
Product Care
To keep your instrument in good working order we recommend the following:
• Store your product in a clean, dry place.
• Change the battery as needed.
• If your instrument isn't being used for a period of one month or longer
please remove the battery.
• Clean your product and accessories with biodegradable cleaner. Do not
spray the cleaner directly on the instrument. Use on external parts only.
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com
To Next Page
Loading...
Need help?
General
