Reed Instruments R7050 - Product Details; Product Quality Assurance; Key Product Features; Safety Guidelines

3
Product Quality
This product has been manufactured in an ISO9001 facility and has been
calibrated during the manufacturing process to meet stated product
specications. If a certicate of calibration is required please contact the
nearest authorized REED distributor or authorized Service Center. Please
note an additional fee for this service will apply.
Safety
• Neverattempttorepairormodifyyour
instrument. Dismantling your product, other
than for the purpose of replacing batteries,
may cause damage that will not be covered
under the manufacturer's warranty.
Servicing should only be provided by an
authorized service center.
• Useextremecautionwhenthelaserbeamisturnedon.
• Donotletthebeamenteryoureye,anotherperson'seyeortheeyeof
an animal.
• Becarefulnottopointthebeamoffareectivesurfaceandstrike
your eye.
Features
• ProvidesfastandaccurateRPMmeasurementsofrotatingobjects
withoutcontactandrevolutioncountofmovingobjects
• Built-inlaserpointeridentiestargetarea
• DurabledoublemoldedplastichousingandbacklitLCDdisplay
• Internalmemoryrecallsmaximum,minimumvaluesaswellaslast
value stored
• Lowbatteryindicatorandautoshut-off
continued...
CAUTION
LASER RADIATION
AVOID DIRECT EYE EXPOSURE
MAXIMUM OUTPUT <5mW
CLASS 3R LASER PRODUCT
WAVELENGTH 630-670nm
EN60825-1:2007
REED Instruments
1-877-849-2127 | info@reedinstruments.com | www.reedinstruments.com