2
Table of Contents
Introduction ................................................................................................ 2
Product Quality ........................................................................................... 2
Safety ......................................................................................................... 3
Features ...................................................................................................... 3
Included ...................................................................................................... 3
Specications .......................................................................................... 3-4
Instrument Description ............................................................................... 4
Operating Instructions ............................................................................. 5-6
Leak Detector ......................................................................................... 5
Transmitter ..........................................................................................5-6
Battery Replacement .................................................................................. 6
Applications ................................................................................................ 6
Product Care .............................................................................................. 6
Product Warranty ....................................................................................... 7
Product Disposal and Recycling ................................................................ 7
Product Support ......................................................................................... 7
Introduction
Thank you for purchasing your REED R9100 Ultrasonic Leak Detector.
Please read the following instructions carefully before using your
instrument. By following the steps outlined in this manual your meter will
provide years of reliable service.
Product Quality
This product has been manufactured in an ISO9001 facility and has been
calibrated during the manufacturing process to meet the stated product
specications. If a certicate of calibration is required please contact the
nearest authorized REED distributor or authorized Service Center. Please
note an additional fee for this service will apply.
REED Instruments
1-877-849-2127 | info@reedinstruments.com | www.reedinstruments.com
To Next Page
Loading...
Need help?
General
