* To save power, the logger’s LED ashing-cycle can be changed to 20s
or 30s via the supplied software.
** To save power, alarm LEDs for temperature and humidity can be dis
-
abled via the supplied software.
***When both temperature and relative humidity readings exceed alarm
level synchronously, LED status indication alternate every cycle. For
example: If there is only one alarm, the REC LED blinks for one cycle
and alarm LED will blink for next cycle. If there are two alarms, REC
LED will not blink. First alarm will blink for rst cycle and the next
alarm will blink for next cycle.
**** When the battery is low, all operations will be disabled automatically.
NOTE: Logging automatically stops when the battery weakens (logged
data will be retained). The supplied software is required to restart log-
ging and to download logged data.
***** To use the delay function. Run the datalogger graph software,
click on the computer icon on the menu bar (2nd from left) or select
LOGGER SET from the LINK pull-down menu. The Setup window will
appear, and you will see there are two options: Manual and Instant. If
you select the Manual option, after you click the Setup button, the log-
ger won't start logging immediately until you press the yellow button in
logger's housing.
SPECIFICATIONS
Logging Rate: Selectable sampling interval from 2 seconds up to
24 hours
Operating Temperature: -35 to 80°C or -31 to 176°F
Battery type: 3.6V lithium (1/2AA) (SAFT LS14250, Tadiran TL-5101
or equivalent)
Battery life: 1 year (typically) depending on logging rate, ambient
temperature and use of alarm LEDs
Dimensions/Weight: 101x25x23 mm (4x1x.9”)/172g (6oz)
To Next Page
Loading...
