27
10 Charging the ight battery
Before use always make sure the battery is charged.
There are three options to charge the battery:
10.1 Charging Method 1
Charging battery by the USB port on a computer.
Description:
1. Connect the USB charger with USB port.
2. Connect the battery with USB charger:
3. LEDonwhencharging,LEDOFFwhenchargingnished.
10.2 Charging Method 2
Charging battery by power supply adapter.
Description:
1. Connect the USB charger with the power supply adapter.
2. ConnectthebatterywithUSBcharger:LEDonwhencharging,LEDOFFwhenchargingnished.
10.3 Charging Method 3
Charging battery by power bank.
Description:
1. Connect the USB charger with the power bank.
2. ConnectthebatterywithUSBcharger:LEDonwhencharging,LEDOFFwhenchargingnished.
11 First Flight Preparation
Red light on > charging
Red light off > fully charged
1. Ensure suffícient power supply of the transmitter and
helicopter.
2. Keepyourightinasuitablespacewhichisawayfrom
trafc,people,electricitypylonsandpools.
3. Do not lock the main rotor screws too tightly to keep
folding smoothly. If the main rotor screws are too tight,
thehelicopterwillshakewhenying.
4. Under emergency situation, you can press the „sharp
stop“ button for 3 seconds to land the helicopter wit-
hout rotating.
Note:
This action may cause helicopter crash.