Reely C129 V2 - Flight Operation Steps

30
13.2 Flight Operation Steps
1. Turn on the transmitter and let the helicopter stay near to the transmitter.
2. Install the aircraft battery in the battery compartment safely and securely and then
start pairing.
3. Thelightsofthehelicopterandtheremote-controlashatthesametime.Thenpush
the throttle stick from top to bottom quickly. The remote control makes a ‚DI‘ sound,
and the indicator lights of the helicopter and remote control are always on, which
means binding successful.
4. Pull the two joysticks to the outer eight angles to start the helicopter. (You can also
press the one-key takeoff button to take off the helicopter directly.)
5. Keep the helicopter head forward and keep safe distance with the helicopter.
6. When manually operating the aircraft to land, please keep the throttle stick at the bottom for 2-3 seconds, and
then release it after the propeller has completely stopped rotating.(This operation is not required when using the
one-key landing function).
Note:
– Beginnershouldpayattentiontothedirectionofight.Keeptheheadforwardtoavoidcausinginjury.
– Inordertoavoidbeinghit,donotlookatthehelicopterathiplevelwhenities.
– Inordertoavoiddistractions,pleaseconrmwithoutothertransmittersatworkaround.