Reencle Prime - Waste Amount and Maintenance

13
REENCLE PRIME - USER MANUAL ENGLISH
05 Open the large lid
06 Tips for proper care of Reencle Prime
Open the large lid when it’s time to remove
compost from Reencle Prime’s stirring tank. Place
your hand on the handle, located at the front of
the Reencle Prime and gently pull it upward. The
large lid will open for access to contents inside the
stirring tank.
Before putting food waste into the Reencle Prime, rinse the food with running water and part it dry. This
ensures optimal performance for the fermentation and decomposition process.
Frequently clean the mesh lter, located inside the stirring tank, using a cleaning brush. The mesh lter
can be removed, washed with water and placed in the Reencle Prime again.
If you will not use the Reencle Prime for an extended period of time (1 month or more), take the
following steps:
01. Stop adding food waste to the Reencle Primer and allow it to fully decompose all the food waste.
02. Unplug the Reencle Prime, scoop out all of the byproduct from the stirring tank and place it in a
well-sealed container. Store the byproduct in a well-ventilated area, avolding placing it in sunlight. The
byproduct can be reused when you return.
The purier lter, located on the back of Reencle
Prime should last up to 9-12 months. To remove
the purier lter, rotate the two plastic screws on
both sides counter-clockwise to the unlock position
and remove the lter. To reinstall, place the new
nter in the same position, insert the plastic
screws and rotate clockwise to the lock position.
To purchase a purier lter, please visit Reencle’s
website or contact Reencle through Facebook.
When the large lid is open, the
stirring rod will temporally stop if
the power is on. It will begin au-
tomatically stirring again when
the lid closes. However, before
removing compost, power of the
Reencle rime machine using the
Power button to ensure safety.
Once the decomposed waste
reaches the limit line, noted on
the interior of the stirring tank,
use the included shovel to scoop
out the compost until the inner
contents reach the minimum
line. Always leave the stirring
tank lled to the “MIN” line in
order to continue the microorga-
nisms fermentation and decom-
position process in place.
Moisture and any odors are
emitted in the form of puried
vapor air through the bottom of
Reencle Prime via the automatic
dehumidication function.