Reencle Prime - How to Install & Prepare for Use; Installation Guidelines

7
REENCLE PRIME - USER MANUAL ENGLISH
03. Initial Setup
Unpack your Reencle
Prime and place it on
a at surface in a well
ventilated area.
Allow 4 inches (10 cm) between the machine
and the back wall for proper ventilation.
Reencle Prime is designed for indoor use
only, where temperatures do not fall below
32 ºF (0 ºC).
Do not install in a watery area or where the
machine could be exposed to rain.
Reencle Prime will arrive with the carbon
lter already installed. Check your lter for
a yellow sticker, and remove the sticker
before using.
If you ordered an extra carbon lter, store it
indoors in a dry place for later use.
Remove the Compost
Starter bag from the
machine, and any
other contents frim
the inside of the
stirring tank.
Remove the sticker on
the carbon lter.
Plug in the Reencle
Prime and press the
power button.
01
02
04
03