Need help?Do you have a question about the Reer Magnus RFID S Series and is the answer not in the manual?
General| Brand | Reer |
|---|---|
| Model | Magnus RFID S Series |
| Category | Security Sensors |
| Language | English |
Describes scope and accessibility of instructions.
Explains coding for sensor and actuator variants for protection.
Defines applications and lists product certifications.
Provides critical safety instructions and misuse warnings.
Details different encoding types and their implications for manipulation protection.
Explains the behavior and conditions of the two safety outputs.
Describes the function and connection requirements for the safety inputs.
Explains the External Device Monitoring input and its modes.
Details the function of the diagnostic output for monitoring sensor states.
Details LED displays, flash codes, and diagnostic signals for status.
Provides instructions for mounting, installing, and adjusting the sensor.
Covers wiring requirements, including series connection and power supply.
Outlines essential checks and steps for successful device commissioning.
References detailed technical specifications for performance and electrical parameters.
Explains sensor indication for actuator in boundary switching area.
Details the teach-in process for configuring individual actuators with the sensor.
Specifies maintenance recommendations and periodic functional tests.
Provides guidance for diagnosing and resolving common faults and errors.
Instructions for safely removing the safety sensor from its installation.
Provides information on the proper disposal of packaging and used parts.
Explains how to locate and interpret the production date on the sensor housing.
Specifies essential safety levels and failure probability according to standards.
Details architecture, coding types, fault tolerance, and service life.
Details the pin functions and color codes for the electrical connector.
Provides a wiring diagram for standalone operation with direct control.
Illustrates wiring for connecting multiple sensors in a series cascade.
Declares the product's safety levels (PL, SIL) according to relevant standards.
Lists the European Directives and standards that the product complies with.
To Next Page
